getting_started_with_geda
Table of Contents
Getting Started With gEDA
Introduction
This tutorial is about drawing schematics and designing Printed Circuit Board's using the tool gEDA. Schematics are drawn using 'gschem' tool. Then this schematic has to be imported into the 'pcb' tool. This can be done by either using the import option in the 'pcb' tool(only available in new pcb versions) or by using the tool 'gsch2pcb'. Once the schematic is imported, the PCB can be designed.
Reference
getting_started_with_geda.txt · Last modified: 2012/02/25 15:19 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
